BeXom 125×1mm Cutting Disc (Type 41) – Precise Cutting of Stainless Steel (INOX) & Steel
Thin cutting kerf, controlled feed, and clean cut pattern – developed for daily use on 125-mm angle grinders.
Application Profile
The BeXom 125×1mm is a slim, fast-cutting disc designed for stainless steel/INOX, steel, and common metals. It shows its strengths where fast work with high dimensional accuracy is required: cutting handrails, sheet and profile parts, assembly and repair work, as well as fine contours on visible components.
Technical Specifications
| Diameter |
125 mm |
| Thickness |
1.0 mm (narrow cutting kerf) |
| Bore |
22.23 mm |
| Design |
Type 41 (flat) |
| Abrasive/Bond |
A60 QBF |
| Standard |
EN 12413 |
| Max. Peripheral Speed |
80 m/s |
| Max. Speed |
12,200 RPM |
| Suitable Materials |
Stainless steel (INOX), steel, metal, iron |
| Compatible Tools |
125-mm angle grinders (22.23-mm flange), e.g. Bosch, Makita, Metabo, Flex, Einhell, Fein, Hikoki |
| Item/SKU |
112310 |
Performance Features
Thin Cut – Minimal Rework
The 1-mm design ensures a narrow kerf width and reduces burr formation. Visible stainless-steel edges remain clean, minimizing post-grinding.
Stable Operation at High Feed Rate
The balanced A60 QBF composition allows controlled, low-vibration cutting – even during longer separations on profiles and pipes.
Gentle on Materials
Low friction heat reduces discoloration on INOX and minimizes distortion on thin-walled workpieces.
Typical Applications
- Pipes, profiles, angles, and sheets made of stainless steel/VA and steel
- Assembly cuts on construction sites and in workshops
- Maintenance, railing construction, plant and equipment engineering
- Bodywork, sanitary, and piping applications
Operating Instructions
| Use for cutting only – do not apply side pressure on the disc. |
| Do not exceed the maximum speed of 12,200 RPM. |
| Always wear personal protective equipment (eye, hearing, and hand protection). |
| Secure the workpiece firmly; pay attention to spark direction. |
| Store dry and flat; do not use damaged or moist discs. |
Alternatives and Additions
Other variants are available for special tasks: 125×1 mm Premium, 125×2.5 mm, Rhodius 125×1 mm, Dronco 125×1 mm.
Questions and Answers
Why 1.0 mm instead of 1.6 mm or 2.5 mm?
1.0 mm cuts faster and with a narrower kerf; 1.6 / 2.5 mm provide more rigidity for thicker cross-sections.
Is the disc suitable for stainless steel?
Yes, it is designed for INOX applications and helps to limit discoloration thanks to its low heat input.
Which machine do I need?
A 125-mm angle grinder with a 22.23-mm bore. The machine’s speed must match the disc specification.
How can I increase the service life?
Use moderate pressure, keep a straight cut, maintain correct speed, and store dry; avoid side loading.
Can the disc cut aluminium?
Standard discs may clog on soft non-ferrous metals. For aluminium, use specially designated non-ferrous metal discs.
Is wet cutting possible?
No, this version is designed for dry operation with angle grinders.
Short Description
BeXom 125×1 mm – slim cutting disc for stainless steel and steel: smooth running, clean cut pattern, A60 QBF, EN 12413, 22.23-mm bore, up to 80 m/s or 12,200 RPM.
